Construction workers are often exposed to silica dust, which is linked to lung disease. |
Senate accusations of prejudice have forced a US government agency to defend its actions over a proposed tightening of regulations concerning industrial workers’ exposure to deadly silica dust.
The row blew up late last year when the Occupational Safety and Health Administration (OSHA) began a public consultation on setting new limits for working with the dust, which is a major hazard for construction workers, causing serious lung disease.
The agency ruffled feathers in the Senate when it asked that those submitting evidence should declare their funding sources.
Last November, a group of 16 senators wrote an open letter to OSHA criticizing the move for its implication that the agency might prejudge submissions. The consultation period closed on 11 February, and OSHA is now vigorously defending its request.
“What I’m doing here is essentially saying the information that we will base our standard on has to be of the highest integrity, and we have to do it in a transparent manner, and conflict-of interest disclosure is an important component of both of those,” David Michaels, the head of OSHA, told Nature.
“It would be surprising right now if a scientific journal didn’t ask for that information.”
Produced by tasks such as grinding concrete and sandblasting, used in the construction and other industries, crystalline silica dust can cause silicosis — an incurable disease involving inflammation of the lungs — and lung cancer.
The dust is thought to kill or disable thousands of people in the United States every year, but guidelines on working with it have not been updated for more than 40 years.
“Our current standard is antiquated,” says Michaels. “There are literally millions of workers in the United States who are exposed to dangerous levels of silica.”
The present rules generally advise limiting exposure to roughly 100 micrograms of crystalline silica per cubic metre of air, averaged over 8 hours. OSHA has proposed halving this limit.
Workers would also have to be better protected, for example by dust being ‘wetted down’ and with the use of extraction fans.
OSHA estimates that the new regulations will cost about US$640 million a year, with employers picking up most of the tab, but the agency believes that the rules will save up to 700 lives a year. US standards are also influential in other countries, some note, potentially saving many more workers’ lives.
The proposals were published in the Federal Register last September, at the start of the consultation period.
The Associated General Contractors of America, an industry group based in Arlington, Virginia, called the proposals “significantly flawed” and “rife with errors and inaccurate data”.
And shortly after they were published, the group of senators, led by Lamar Alexander (Republican, Tennessee), a senior member of the Senate Committee on Health, Education, Labor, and Pensions, wrote to OSHA saying that they were “very concerned about OSHA’s attempt to have commenters disclose their financial backers”.
They added that the request “raises questions” about whether OSHA would prejudge submissions on the basis of who was sending them.
There is also support for the new silica standard. Tee Guidotti, a physician in Washington DC and a member of the American Thoracic Society’s Environmental Health Policy Committee, says that the scientific case for the proposed limit is “close to being bulletproof”.
He adds that, if it is successful, it could provide a template for how OSHA deals with similar hazards, such as dust and radon.
The viewpoints contained in the 1,600 or so comments received through the consultation will be discussed in public hearings starting on 18 March. It will probably be several years before a final rule is enacted.
Source: Nature
Concerned about silica dust or other fine particles and fumes at the workplace? Electrocorp offers industrial and commercial air cleaners for chemical and particle control that can help provide cleaner and more breathable air at work. Contact Electrocorp for more information and a free consultation.
No comments:
Post a Comment